Tag Archives: Boxcar

AC 2915

Posted on by
Reply

Here’s another AC 40′ box I finished some weathering on last night.

IMG_4140

Like the others earlier this week, this was a TrueLine Trains Ontario Northland boxcar with some custom painting (the large patches over the logo were done by hand to try to simulate how the logos were painted over with a paint roller, and smaller patches over the reporting mark and number masked and airbrushed) and then weathered with a combination of pan pastels and a bit of grime airbrushed along the lower edge of the car and on the car ends.

Interestingly, Ted Ellis has an early 1990s photo of this car on his site where it looks like the number on the car end actually reads 2907. So it appears that this car has changed identities along the way. It looks like it may have been acquired from the Ontario Northland as AC 2907, possibly renumbered into a 10000 series work number and then reassigned back to the general pool and renumbered 2915, possibly replacing a different car that was the original AC 2915. (Dale Wilson sent me an older photo of 2915 that shows a completely different pattern of paint patching, and it’s the same side as Ted’s photo, so it’s clearly not the same car.) I reproduced this confusion on my model as well. Like Ted Ellis’s photo, the numbers on the ends of my car read 2907, but on the sides on a prominent black patch it’s no. 2915.

A trio of (almost) finished 40′ AC boxcars

Posted on by
Reply

Enjoying a weekend at home by myself to get back into a few projects. One project that received a fair bit of attention today was finishing off the paint, lettering and weathering on a few of the Algoma Central 40′ boxcars I’ve had in progress for a while. Three cars are now basically complete, with three more in various stages of lettering (included the 9′ door rebuild which will become AC 2917. It’s now on the workbench in green and yellow and half lettered. A little ways to go on that one yet.) When all six are complete, I’ll have four 2900 series general service (but still non-interchange) boxcars and two 10000 series work supply/tool cars.

Here’s a few roster shots of the three finished cars. They’re all TrueLine Trains Ontario Northland NSC 40′ boxcars with custom paint patches and lettering. Weathering is a combination of airbrush and pan pastels.

IMG_4102

AC 10352, tool/supply car. The prototype car also has turbine style roof vents and a step below the door which will have to be added. The step won’t be a problem, but I’m not sure how to solve the ventilator detail yet.

IMG_4104

AC 10364, tool/supply car. Like 10352, it just needs the addition of roof vents (although a different sort) and a stirrup step under the door to finish off.

The photo loses some of the detail and character of the weathering, and this car actually ended up a fair bit dirtier than the prototype photos of this specific car that I was working from, but it’s not atypical of other cars in the series, and I actually like the final look, so I think I can live with that.

IMG_4106

AC 2906, general service boxcar. I sanded the paint patch a little to let some of the original “Ontario’s Development Road” logo show through a bit.

Like the other two cars this car received a general grunge with the airbrush and streaking and detail work with pan pastels. I also tried to get a bit of rust splotching going on in the door using a little bit of acrylic paint and pastels. The weathering isn’t quite to the level of some other things I’ve seen online (some of which will blow your mind) but it’s serviceable and I’m still learning and getting the hang of it.

(This is post #200 published to this blog!)

ONT 9′ Door Boxcar Rebuild (AC 2917)

Posted on by
3

A while back I stripped the paint on a handful of True Line Trains 40′ Ontario Northland boxcars in preparation for modifying and repainting them as cars acquired second hand by the Algoma Central for LCL and company service. Naturally, these then sat on the workbench for a while awaiting detailing and painting while I tackled other projects. Last night I pulled these back out in order to start finishing off the details and get them ready for painting.

IMG_2775

First up is this car which will end up representing AC 2917. This car was built in 1947-48 by National Steel Car for Ontario Northland and rebuilt by the ONR in the early 1960s with a 9′ door opening. This rebuild required reinforcing of the side sill below the door opening and new door tracks. Note that the new doors used were taller than the original doors, being meant for a 10’6″ interior height car while the Ontario Northland boxcars were older cars with a 10’0″ interior height, so the door tracks in addition to being longer to accommodate the larger size of the door are mounted lower down.

The doors on the True Line model are unfortunately molded as part of the car body, so the first step of the major modification was to cut this opening out entirely. The side sills also had to be carefully cut off along the bottom edge of the car body so that new side sills and door tracks cut from styrene strip could be added. I don’t really recall where the doors came from originally, I pulled them out of my parts box where they’ve been for a while.

After removing the ladders and brake detail, original mounting holes were filled in with round styrene rod and the ladders were shortened and reattached. Tackboards on the doors and ends are original parts from the model relocated. The brake wheel housing was also remounted lower down.

This car just requires a few more of the brake detail parts to be re-applied on the “B” end of the car, and also the addition of a new horizontal grab iron on each end (I couldn’t find my small diameter brass wire last night) to complete the detailing. Then it should be ready for the paint shop.

I have a few more cars that basically just need all of the ladder and brake detailing work done which I hope to complete over the next week and then I should have a small fleet of about half a dozen ex-Ontario Northland boxcars for work and wayfreight service.

CP Woodchip Cars Painted and Lettered

Posted on by
Reply

IMG_2489

Last week I finished painting and decaling my pair of CP woodchip boxcars which are now numbers CP 31181 and 31202. On Saturday I was able to deliver them to the club layout, where they will enter service for now with some other modified cars.

The two cars were sprayed Pollyscale freight car brown and lettered primarily with CDS dry transfer sets, with some additional details (including Plate C markings, ACI labels, re-weigh dates, end reporting marks and numbers and some additional small data) from various Microscale and Black Cat sets.

Once the decaling was completed, I gave the cars a quick coat of Dullcote to seal the lettering and then a general spray of “grunge” using a thinned mixture of various weathered blacks.

That’s one project off the workbench that’s been there for a while!

Chip Doors Completed

Posted on by
Reply

While I was away travelling this weekend I managed to stop off at a hobby supply store and pick up some of the raw materials I needed to keep my current projects moving forward. A little work this evening and the doors on the two wood chip boxcars are completed.

IMG_2331

Compared to the previous post, the hinge and locking bar details have been added with .025″ rod and .010x.020″ strip to catch the overall impression and look of the prototype photo.

The two cars now just need a minor touch up of body and underframe details, and they’ll be ready for the paint shop this week.