Freight Car Friday #51 – NOKL 732348

Posted on December 4, 2015 by Chris van der Heide

An innovation in the 1970s was the design and development of the centre-divided bulkhead flatcar for the shipping of lumber. Designed with a central truss structure that both strengthened the car and supported the load without the need for additional stabilization in the load and equipped with built in ratchets and tie down cables to eliminate a lot of strapping and with or without deck risers for the first row of packaged lumber bundles. This made it much easier to load packaged and bundled lumber as bundles no longer needed to be staggered in order to create a solid and secure load and a lot of waste generated in the form of strapping and blocking material is prevented.

NOKL 732348 was photographed on July 16, 2015 at Hearst (Wyborn siding) with a load of lumber from Lecours Lumber in Calstock, Ontario. Leased flatcars with the reporting marks of shortline Northwestern Oklahoma Railroad (actually a mark used by cars leased to various railways by First Union) are among the most commonly seen in this service, and these blue painted cars in the series NOKL 732300-732349 and 733050-733099 (built by National Steel Car in 2000 and 1998 respectively) are specifically leased to Ontario Northland. Brown painted NOKL 734500-734599 – built by NSC in 2004 – also seems to be a series exclusively seen in ONR service in addition to Ontario Northland’s own ONT 4100-4149 series, built by NSC in 1997.

Series	Builder	Date
ONT 4100-4149	NSC	1997
NOKL 732300-732349	NSC	2000
NOKL 733050-733099	NSC	1998
NOKL 734500-734599	NSC	2004

Additionally, CN provides some cars for loading in the area, in various family reporting marks (CN, IC, WC, BCOL, etc.) and a few other NOKL groups.

CN Operations at Hearst

Posted on December 4, 2015 by Chris van der Heide

Hearst was the Algoma Central’s northern terminus and connection to the Canadian National Railway. For yard, station and other facilities the ACR shared with CN.

The ACR wye and connection to the CN main was just to the west of Hearst yard, and any movements on the CN main from Hearst Junction to Hearst would have to be made under the CN dispatcher’s authority. Conversely, if CN needed to turn some equipment, movements over the wye required the ACR dispatcher’s authority.

Equipment Restrictions

When the ACR first connected to Hearst in 1914, Hearst was a division point on the transcontinental mainline of the National Transcontinental Railway. However when the NTR became part of the Canadian National Railways in the early 1920s, this became a secondary line to the ex Canadian Northern Railway main line (crossed by the ACR at Oba) which is still CN’s primary transcontinental route today. As such, this line languished and was never maintained to the same standard as a more major route.

The Pagwa subdivision between Hearst and Nakina featured exceptionally light rail – often less than 80 lbs/yard – that had never been upgraded since the steam era and probably in these late years a fair bit of deferred maintenance in general. This line was *severely* restricted as to the weight and types of equipment that could run over it, with the heaviest diesel locomotive permitted on the line being an SW1200RS. (CN 1387-1395 are known to be in Hearst in the late 1970s.) Cars with greater than 177,000 lbs (88 tons) *gross* weight required special handling, and during the months of May-June for the spring thaw cars exceeding 142,000 lbs (71 tons) gross weight are banned west of Calstock.

East of Hearst is better, but still light rail. GP9s could operate west of Kapuskasing to Hearst, but between these two stations heavy six axle units like C630s and SD40s were explicitly banned and even modern four axle road switchers such as C424s, GP38-2s and GP40-2s are to be used “only in emergency, and at 10 miles per hour below” the regular speed limit making a GP9 pretty much the biggest unit that could be expected to run into Hearst in the 1970s and 1980s.

The north end of the ACR was also relatively light rail (but definitely better maintained than between Calstock and Nakina, which CN was trying to abandon anyway) and AC trains typically avoided using their six axle SD40 units north of Hawk Junction.

Passenger Service

Passenger service west of Hearst to Nakina (junction with CN’s main line) was actually still provided during the early 1980s by trains 272/273. While officially listed as mixed (freight and passenger) trains in the timetable, most sources seem to agree that in practice it was passenger-only in the 1980s, with any westbound freight routed via the ACR to Oba, as there was zero on-line freight traffic except for the Lecours lumber mill at Calstock, which by this point would be served by a turn job out of Hearst yard. CN was petitioning to abandon the line between Calstock and Nakina at this point, and moving the through traffic off of the line probably helped to destroy any remaining on-paper revenue and support their petition. And due to the extreme weight restrictions on the line, a lot of traffic simply could not go that way. Abandonment formally happened in 1986 and the line was torn out west of Calstock.

CN 7210 combination baggage/coach at Hearst in 1976. Paul O’Shell photo.

The (non) “mixed” typically ran with an SW1200RS and single heavyweight baggage/coach combination car. CN 7210 appears to have been the regularly assigned car on this line. This car remained in CN colours all through the early 1980s, although passenger service was officially operated by VIA Rail then. In my summer 1979 CN timetable, 273 departs Hearst at noon on Tuesdays, Thursdays and Saturdays, with 272 from Nakina running on opposite days (Wednesdays, Fridays, Sundays) and scheduled to arrive at 5:30 pm.

There was no passenger service running east out of Hearst anymore by this point in time. Hearst was once the final destination of local passenger service from Cochrane, connecting with southbound trains over the Ontario Northland to Toronto, but by the late 1970s passenger service was provided only as far as Kapuskasing by the joint CN-ONR train the “Northland” from Toronto. (Replaced later by the Toronto-Cochrane coach-only “Northlander”, which itself was discontinued in 2009.)

ACR No. 1 at Hearst, July 2, 1972. Robert Schwenk photo in my collection.

The Algoma Central’s passenger service ran daily except Monday from Sault Ste. Marie to Hearst during the spring/summer, and on the weekends only (Fridays through Sundays) during the fall/winter season. No. 1 had a scheduled arrival time of about quarter after seven during the summer, and quarter to six in the winter. The ACR train would tie down on the main track in front of the station and depart early the next morning as no. 2. (On days that the CN “mixed” ran, the inbound ACR would arrive up to two hours after, and the outbound train would be almost to Hawk Junction by the time of the 273’s noon departure.)

Freight

Local switching of the yard and local industries around Hearst would have been performed by CN, as it was their track and facilities. The lumber mill at Calstock would have also been handled by an extra turn job out of Hearst yard although I do not know when this would run.

The 1979 CN timetable shows a Kapuskasing subdivision freight departing Hearst at 11 am on Tuesdays, Thursdays and Saturdays for Cochrane. I would presume that the CN crew would spend the morning performing the local switching requirements

The corresponding westbound is not timetabled, but I would assume it to operate as an extra on opposite days (Wednesdays, Fridays, Sundays) the same as the mixed train to the west of Hearst.

My 1989 CN timetable does not have any freight schedules actually listed for the Kap. sub, and sadly I do not have one from closer to 1985.

As mentioned above, except for the lumber mill at Calstock, there was no on-line freight customers on the Pagwa subdivision towards Nakina, and due to the condition of the line, really no traffic at all was actually routed over this line anymore at this point, instead being handled by the ACR to Oba to be returned to CN for the trip westward.

ONT no. 516 prepares to depart Hearst for Kapuskasing with several loads of lumber from Lecours and several loads of copper concentrate from Michigan bound for Rouyn-Noranda. July 2015, my photo.

The Kapuskasing subdivision and the remains of the Pagwa subdivision to Calstock (the rest abandoned in 1986) were sold to Ontario Northland in August 1993.

On the ACR side of things, ACR freight no. 5 would arrive in Hearst in the evenings on weekdays, Monday through Friday, with no. 6 departing south with interchange traffic the following day, Tuesdays through Saturdays.

Modern CANFOR Wraps

Posted on December 2, 2015 by Chris van der Heide

An earlier file featured a version of a CANFOR (Canadian Forest Products) wrap from around 1990; here’s a few more modern versions.

CANFOR – ~2003-2006
PDF | XLSX – Prototype

CANFOR – ~2010-Present
PDF | XLSX – Prototype

CANFOR Red – ~2015
PDF | XLSX – Prototype

Bonus:

Stuart Lake Lumber (Fort St. James, BC) – ~1980s (closed 2007)
PDF | XLSX – Prototype
(With assistance from A.J. Shewan)

Locals and turns – operations on the Northern subdivision

Posted on December 1, 2015 by Chris van der Heide

Contrasting with the south end of the railway, with heavy freight tonnage including Wawa ore and the rocky hills, steep grades, sharp curves and tall bridges that once gave the Algoma Central & Hudson Bay Railway (as it was then called) the alternate nickname “All Curves & High Bridges”, the Northern Subdivision north of Hawk Junction flattened out considerably as it moved away from Lake Superior.

Running 160 to 290 miles north of Sault Ste. Marie, this area sees the typical sort of backwoods northern Ontario railroading, serving lumber mills and logging operations, but also features the ACR’s primary interchange connections and crossings with Canadian National and Canadian Pacific’s transcontinental main lines.

No. 5 and 6

Train no. 5 was the regular northbound freight on the Northern Subdivision. Departing Hawk Junction for Hearst in late morning from Mondays through Fridays this train would handle any required switching north on the way, including the CP and CN interchanges at Franz and Oba, the lumber mills at Dubreuilville or Mead and any pulpwood spurs in between.

An ACR freight switches several empty CP flatcars from the interchange tracks at Franz after meeting northbound passenger train no. 1, July 2, 1972. R.J. Schwenk photo in my collection.

No. 5 would return to Hawk Junction the following day (i.e. Tuesdays through Saturdays) as no. 6, again performing any required switching southbound and lifting southbound traffic for Hawk Junction and Sault Ste. Marie. Freight from the arriving no. 6 would be then forwarded to Steelton yard on No. 12, departing Hawk Junction in the evenings in early 1980s timetables.

Oba Turn (No. 15/16)

On weekends, the northbound freight from Hawk Junction would just run to Oba (as no. 15 instead of no. 5) and then return the same day as no. 16). The Oba Turn would switch interchange traffic at Franz and Oba and any required overflow switching at the pulpwood spurs at Mosher.

This train no longer appears in the timetable after the shutdown of Newaygo’s operations in 1985, but presumably would have still run extra on an as-needed basis to handle steel interchange traffic from Sault Ste. Marie to Franz and Oba.

Franz Turn

In the late 1980s and 1990s, following the reintroduction of rail service at Dubreuilville, the ACR began running a weekday evening turn job out of Hawk Junction to Franz to switch the mill at Dubreuilville and interchange traffic at Franz.

Described in an older message from Reg Fitzpatrick, former station agent at Franz:

The arrangement was that No. 6 would lift first out traffic there [Dubreuilville] and the nightly Franz Turn would do the rest of the switching for the lumber ety spotting along with the chip etys which were normally stored at Wanda Mile 188 along with the regular storage track at Franz etys.

No. 5 in the AM would put these two ACIS cars into the ramp with one off spot. The loader equipment was large enough at the mill there to move one car out and pull the other one into the ramp without most times having to be done by the train crews.

And of course, as always, any overflow traffic could always be handled by the occasional extra.

Operations Today

Today of course, there are no longer any mills on the north end of the railway, however interchange at Franz, Oba and Hearst still generates a fair bit of traffic.

CN L572 rolls past Wyborn siding departing Hearst for Oba, Franz and Hawk Junction, with loads of lumber and paper from the Ontario Northland as well as returning pulpwood empties. July 2015.

The modern version of no. 5 & 6 are CN’s L571 and L572. Running daily or as required between Hawk Junction and Hearst, these handle the interchange traffic at these three locations as well as switching pulpwood cars at Langdon siding, one of the few only sources of actual on-line traffic north of Hawk Junction today. L571 and L572 are basically extensions of trains L573 and L574 between Steelton yard and Hawk Junction.

Freight Car Friday #50 – CN 557636

Posted on November 27, 2015 by Chris van der Heide

CN 557636 is one of several of these double door CN boxcars shots in the same train in August 2004 at Sault Ste. Marie.

Part of series CN 557440-557739 built in 1974 (and identical sister series 557300-557439 built the previous year), these 52’6″ I.L. cars were built for lumber and forest products service and when new had the main sliding door painted green as a colour coding to indicate this assignment. (Here’s one in 2006 with the original paint including the green door intact.) With modern computerized systems this indicator is no longer needed and most of these cars gradually had the doors repainted the same brown as the rest of the car.

For modelling in HO scale, Kaslo shops produced (produces?) a resin kit for this type of car. (I have two on my shelf to be built up and put into service.)

This car and many other double door boxcars in the train are likely loaded with either plywood or OSB from mills at Hearst or Limer.

Algoma Central in HO Scale

Modelling the Algoma Central Railway in HO scale

Author Archives: Chris van der Heide