Recently Completed Lumber Loads

Or, I should say “nearly” completed as they still need the guiderail boards added along the bottom sides (attached to the tops of the floor risers and holding the bottom row of bundles in place laterally in the real load). But I’m currently out of 2×6 strip.

Weyerhaeuser:

IMG_5229

Normick-Perron:

IMG_5361

Lecours Lumber:

IMG_5362

6 thoughts on “Recently Completed Lumber Loads

  1. Question on that top photo (the siding with the shed at the end) – where is that? I don’t recognize the background(looks like an open pit, or landslide, in the background).
    Blair

    • The bundles are 2 1/2 feet tall, approx. 4 feet wide and 8, 10, 12, or 16 foot lengths. (14 foot lengths are probably available from some mills as well, but I only did the first four sizes in my own loads.)

      There’s more detailed information on the making of the load, plus printable files for all the graphics I used on the lumber loads page:

      http://vanderheide.ca/blog/lumber-loads/

Leave a Reply

Your email address will not be published. Required fields are marked *


7 × two =