Freight Car Friday #46 – ESAX Flatcars

Posted on by
3

IMG_3067

These two cars represent a brand new (built in February of 2015) series of bulkhead flatcars operated by Essar Steel Algoma with their own reporting marks (ESAX). The first example above, ESAX 25, was photographed in the Huron Central yard in Sault Ste. Marie on July 12, 2015. Almost an entire track appeared to be filled with these empty cars.

The second example below, ESAX 38, was photographed with a load of steel in a westbound Canadian Pacific train at White River on July 15, 2015. Presumably this car (and several other steel loads, mostly coils, next to it) were interchanged from CN at Franz.

IMG_3435

Work Car Wednesday #2

Posted on by
Reply

ac10588-1

These two interesting gondola cars are support cars that would be paired with one of the railway’s light diesel hoist to carry buckets and other attachments and supplies for the crane.

The above car, AC 10588, is a boom car; it carries crane supplies and a clamshell bucket, and would be coupled directly to the crane while in transit, with the crane’s boom positioned and tied down over this car. Notice how the corners of the car have been cut off at an angle to allow the crane boom to swing over the car. AC 10587 has been identified as an almost identical car.

The second car below, AC 10591, is labelled simply as a bucket car. Loaded with no less than four different clamshell buckets, it also features a storage area at the close end for related supplies. The yellow car coupled at the far end is bunk car AC 10607, which was assigned as a crane operator’s sleeping car.

ac10591

Both of these two cars are also rebuilt from older Algoma Central gondolas from the series AC 4601-4803 or 4804-4850, which were (re)built by the AC’s car shops in 1946-1948 from older 40′ flatcar underframes.

Both photos courtesy of Blair Smith.

Freight Car Friday #45 – AC 10715

Posted on by
Reply

ACR from Blair 027

This interesting car is a former gondola from the series AC 4804-4850, (re)built in 1948 from older 40′ flatcar underframes.

Equipment register information indicates that these unique cars had a 40’10” inside length and 4’0″ inside height, and some lasted in active service into the early 1970s.

The open side above the dropping reinforced sill really cuts a unique profile on these cars, and would certainly be an interesting addition to a layout set anytime between 1947 and 1970, and as proved by this 1956 Jim Parker photo in Toronto, these cars definitely travelled across country, so almost any Canadian modeller could make an excuse for wanting to scratchbuild one.

AC 10715 bears a work service number, and for some reason has had about two thirds of the sides cut away, turning most of the car back into a flat car. I’m not sure why this was cut back the way that it was or how the railway was using this car. Shown here in Sault Ste. Marie off its trucks, this car is clearly about to be scrapped.

Photographed by Blair Smith in the early 1990s.