A trio of (almost) finished 40′ AC boxcars

Enjoying a weekend at home by myself to get back into a few projects. One project that received a fair bit of attention today was finishing off the paint, lettering and weathering on a few of the Algoma Central 40′ boxcars I’ve had in progress for a while. Three cars are now basically complete, with three more in various stages of lettering (included the 9′ door rebuild which will become AC 2917. It’s now on the workbench in green and yellow and half lettered. A little ways to go on that one yet.) When all six are complete, I’ll have four 2900 series general service (but still non-interchange) boxcars and two 10000 series work supply/tool cars.

Here’s a few roster shots of the three finished cars. They’re all TrueLine Trains Ontario Northland NSC 40′ boxcars with custom paint patches and lettering. Weathering is a combination of airbrush and pan pastels.

IMG_4102

AC 10352, tool/supply car. The prototype car also has turbine style roof vents and a step below the door which will have to be added. The step won’t be a problem, but I’m not sure how to solve the ventilator detail yet.

IMG_4104

AC 10364, tool/supply car. Like 10352, it just needs the addition of roof vents (although a different sort) and a stirrup step under the door to finish off.

The photo loses some of the detail and character of the weathering, and this car actually ended up a fair bit dirtier than the prototype photos of this specific car that I was working from, but it’s not atypical of other cars in the series, and I actually like the final look, so I think I can live with that.

IMG_4106

AC 2906, general service boxcar. I sanded the paint patch a little to let some of the original “Ontario’s Development Road” logo show through a bit.

Like the other two cars this car received a general grunge with the airbrush and streaking and detail work with pan pastels. I also tried to get a bit of rust splotching going on in the door using a little bit of acrylic paint and pastels. The weathering isn’t quite to the level of some other things I’ve seen online (some of which will blow your mind) but it’s serviceable and I’m still learning and getting the hang of it.


(This is post #200 published to this blog!)

Work Car Wednesday #2

ac10588-1

These two interesting gondola cars are support cars that would be paired with one of the railway’s light diesel hoist to carry buckets and other attachments and supplies for the crane.

The above car, AC 10588, is a boom car; it carries crane supplies and a clamshell bucket, and would be coupled directly to the crane while in transit, with the crane’s boom positioned and tied down over this car. Notice how the corners of the car have been cut off at an angle to allow the crane boom to swing over the car. AC 10587 has been identified as an almost identical car.

The second car below, AC 10591, is labelled simply as a bucket car. Loaded with no less than four different clamshell buckets, it also features a storage area at the close end for related supplies. The yellow car coupled at the far end is bunk car AC 10607, which was assigned as a crane operator’s sleeping car.

ac10591

Both of these two cars are also rebuilt from older Algoma Central gondolas from the series AC 4601-4803 or 4804-4850, which were (re)built by the AC’s car shops in 1946-1948 from older 40′ flatcar underframes.

Both photos courtesy of Blair Smith.

Freight Car Friday #45 – AC 10715

ACR from Blair 027

This interesting car is a former gondola from the series AC 4804-4850, (re)built in 1948 from older 40′ flatcar underframes.

Equipment register information indicates that these unique cars had a 40’10” inside length and 4’0″ inside height, and some lasted in active service into the early 1970s.

The open side above the dropping reinforced sill really cuts a unique profile on these cars, and would certainly be an interesting addition to a layout set anytime between 1947 and 1970, and as proved by this 1956 Jim Parker photo in Toronto, these cars definitely travelled across country, so almost any Canadian modeller could make an excuse for wanting to scratchbuild one.

AC 10715 bears a work service number, and for some reason has had about two thirds of the sides cut away, turning most of the car back into a flat car. I’m not sure why this was cut back the way that it was or how the railway was using this car. Shown here in Sault Ste. Marie off its trucks, this car is clearly about to be scrapped.

Photographed by Blair Smith in the early 1990s.

Freight Car Friday #28 – AC 10728

ac10728

AC 40′ flatcar 10728 loaded with the wrecked body of hopper car 8444 in October 1993 at Steelton shops. Photo courtesy Blair Smith.

The flatcar appears to be a former 2201-2250 series car. These were officially in service and listed in Official Railway Equipment Registers from the early 1940s to early 1970s, although a number lasted longer in work service. The 10xxx series numbering on the Algoma Central was reserved for work equipment.

Several hopper cars, GP7L-m 102 and SD40-2 184 were wrecked in a 1993 derailment caused by a washout.