ONT 9′ Door Boxcar Rebuild (AC 2917)

A while back I stripped the paint on a handful of True Line Trains 40′ Ontario Northland boxcars in preparation for modifying and repainting them as cars acquired second hand by the Algoma Central for LCL and company service. Naturally, these then sat on the workbench for a while awaiting detailing and painting while I tackled other projects. Last night I pulled these back out in order to start finishing off the details and get them ready for painting.

IMG_2775

First up is this car which will end up representing AC 2917. This car was built in 1947-48 by National Steel Car for Ontario Northland and rebuilt by the ONR in the early 1960s with a 9′ door opening. This rebuild required reinforcing of the side sill below the door opening and new door tracks. Note that the new doors used were taller than the original doors, being meant for a 10’6″ interior height car while the Ontario Northland boxcars were older cars with a 10’0″ interior height, so the door tracks in addition to being longer to accommodate the larger size of the door are mounted lower down.

The doors on the True Line model are unfortunately molded as part of the car body, so the first step of the major modification was to cut this opening out entirely. The side sills also had to be carefully cut off along the bottom edge of the car body so that new side sills and door tracks cut from styrene strip could be added. I don’t really recall where the doors came from originally, I pulled them out of my parts box where they’ve been for a while.

After removing the ladders and brake detail, original mounting holes were filled in with round styrene rod and the ladders were shortened and reattached. Tackboards on the doors and ends are original parts from the model relocated. The brake wheel housing was also remounted lower down.

This car just requires a few more of the brake detail parts to be re-applied on the “B” end of the car, and also the addition of a new horizontal grab iron on each end (I couldn’t find my small diameter brass wire last night) to complete the detailing. Then it should be ready for the paint shop.

I have a few more cars that basically just need all of the ladder and brake detailing work done which I hope to complete over the next week and then I should have a small fleet of about half a dozen ex-Ontario Northland boxcars for work and wayfreight service.

Freight Car Friday #38 – FURX Coil Steel Gondolas

Today’s post features additional coil steel cars leased to Canadian Pacific, and commonly seen carrying steel coils eastward from Essar Steel Algoma over the Huron Central to interchange with CP at Sudbury.

These cars with FURX reporting marks are part of a group of 100 cars leased to Essar Steel Algoma from First Union Rail, the rail leasing and financing arm of First Union Bank. These cars were originally built by Alstom in 1999 as part of NOKL 380601-380850 series.

Officially the NOKL reporting marks are registered to the Northwestern Oklahoma Railroad, but in reality cars with the NOKL reporting mark are owned by First Union and leased to other railroads. Some of these NOKL (like these three here) have been re-marked to FURX and SMW (another First Union managed mark). I’m not sure why First Union sometimes transfers cars between their various marks (FURX, NDYX, NOKL and SMW) but I’m sure there is a organizing system to this in their accounting department and may or may not have something to do with whether a railroad or private operator is leasing the cars.

IMG_0572 IMG_8391 IMG_8392

Three photos taken by myself on two separate visits in 2013.

Recently, a group of these FURX/NOKL cars have been rotating through Ontario Northland Railway’s car shops in North Bay for inspection and repairs prior to lease return; they seem to be largely being replaced by the cars leased from CIT Group featured last week.

Freight Car Friday #37 – CIGX Coil Steel Gondolas

A lot of the rail traffic handled in the Sault Ste. Marie area has always been steel products from the Algoma Steel (now Essar Steel Algoma) mill. With the decline in forestry products from northern Ontario and the closure of the St. Marys Paper mill in Sault Ste. Marie (previously served by the former ACR), the Essar traffic is truly in the majority.

Essar produces many types of steel products including plate, pipe, beams and of course thin sheet steel (which is shipped in large coils). These CIGX marked cars represent a large proportion of the cars currently carrying steel coils eastbound over the Huron Central and Canadian Pacific.

These particular cars are leased (presumably by either CP or Essar Steel Algoma) from CIT Group, and these number series appear to have materialized in 2012-2013. These are all second-hand cars from a few different sources.

IMG_8390

Our first example, CIGX 803021 was actually originally built in 1999 by Thrall Car as part of series CP 346300-346499. It was re-marked CIGX in late 2012 or early 2013.

IMG_5916

CIGX 803049 was built by National Steel Car in 1999 or 2000, and is likely ex-TR. TR translates to Tomahawk Railway, but this is likely one of those “marks of convenience” actually used by one of the large leasing companies like CIT, First Union or GE for cars leased to railroads as TR is one of those reporting marks that’s disproportionately common for a 6-mile long shortline railroad. I’m not entirely sure which company actually owns TR marked cars though.

I used to see these cars in their original markings running on CP here in southern Ontario fairly regularly in the early 2000s; it’s possible these were leased to CP back then as well, and the lease conditions or ownership has changed.

IMG_8393

CIGX 802979 is drawn from another series of former TR cars, also built by National Steel Car around 1999-2000 and remarked to CIGX in 2013.

A fair bit of this coil traffic ends up at a transload/distribution operation alongside CP’s former Toronto, Hamilton & Buffalo Abderdeen Yard in Hamilton, ON.