Additional Photos from Agawa Canyon Park

This follow-up to my post about my ride on the Agawa Canyon Tour Train last week contains several additional photos of items of interest around Agawa Canyon Park, in no real specific order.

IMG_0039

Canyon Lodge, near the north end of the park.

IMG_0040

This display of track speeders and handcar is located near the north end of the park, across the tracks from the Canyon Lodge.

IMG_0042

One of a pair of benches made out of an old wheelset. What an appropriate feature to have at a railway owned park. 😉

IMG_0045

Cast lettering on the back of one of the wheels. AC&HB refers to the full name of the Algoma Central & Hudson Bay Railway, as the company was officially called until 1960. Having never extended anywhere close to Hudson Bay (while surveys were conducted during the initial 1899-1903 construction period, the railway finally reached Hearst in 1914 and was never extended beyond there) the “& Hudson Bay” part of the name was finally dropped.

IMG_0047

A picnic table made from an entire freight car truck. IIRC the sideframe had a 1928 date cast into it, so it may be originally from one of the Algoma Central’s 3100-3199 series wood boxcars, which were built in 1928.

IMG_0067

IMG_0090

The Agawa Canyon Park is only accessible by rail. There is no road access in or out of any kind. Therefore anything coming in or out of the park must go by rail. Garbage collection service for the park is handled by flatcars with dumpsters; trash is collected by the park staff from trash cans in the park and put into the dumpsters which will be hauled away at regular intervals by the regular freight.

IMG_0100

This old passenger car in the park was previously used as a souvenir shop on site, but appears to be unused now.

This car’s last official identity before retirement was as work service diner 10400, and was previously cafe car 502. It had been originally acquired by the Algoma Central in 1949 from the Denver & Rio Grande Western and were originally built for the Denver & Salt Lake Railroad in 1913.

IMG_0105

And one final shot of the serene Agawa River through the canyon.

Agawa Canyon Tour Train Ride

At the beginning of this week I just returned from another week long vacation north of Lake Huron, visting the former Algoma Central and the Huron Central and Ontario Northland railways.

Having previously ridden the Tour of the Line last October, on Monday July 28th, I had a ticket booked to ride the Agawa Canyon Tour Train. The tickets are booked over the phone (which the helpful ACR staff make quite easy – and it’s nice to hear them answer the phone as “Algoma Central Railway”) and can be picked up at the station the morning of the departure. The train’s scheduled departure is at 8 AM, and tickets can be picked up at the station half an hour before the train leaves. I think I arrived there a little before 7:30 and ended up beating the line. Eventually around 7:40 or so the train pulled into the station and we were able to board.

IMG_0154

The tour train at Sault Ste. Marie station. (This photo actually taken after the return to the Sault, when the sunlight is actually on the right side for photographs at this location.)

The train this day was a short 6 cars, including dining car 506, and one of the regular F40PHR locomotives was apparently away in Toronto for some repair work, so the engine on the south end of the train was a CN GP9Rm. The complete consist was as follows (from the north end):

CN 105 (F40PHR)
AC 5705 (Coach)
AC 5702 (Coach)
AC 5655 (Coach)
AC 5703 (Coach)
AC 506 (Dining Car)
AC 5704
CN 4110 (GP9Rm)

The train left precisely on time and we slowly rolled through the downtown, past the huge Essar Steel Algoma mill and past the sprawling CN yards and shops before finally clearing the yard limits and entering the main line north of town. Then it was off into the wilderness north of the Sault.

IMG_0023

Typical lake view along the line.

Inside the coaches on the train there are video monitors throughout, which over the course of the trip play video commentary describing features of the line and its history. The video segments are apparently triggered by GPS location, so it tells you when certain notable features (like the Montreal Falls trestle for one particular example) are soon to be encountered, and also to spread out the history segments over the trip. While to an ACR historian like myself much of the information was known, I still found myself watching each segment when they played with interest, and it certainly gives an interesting background to the area you’re riding through. (Although a couple parts of the narration could use some updating as they refer to the St. Marys Paper Company as a current operation, while it has closed down a few years ago and the mill has been mostly demolished except for some of the remaining original sandstone structures dating from the 1890s mill.)

When the history segments weren’t showing on the monitors, the view was normally from a camera mounted in the front window of the lead F40PHR locomotive, giving a nice live view of the track ahead of the train. This was nice to see features ahead of the train, and was particularly interesting at one point where the train slowed because of a pair of large birds that when disturbed by the train simply flew along the tracks in front of the train for about a minute or so before finally gaining height and flying out of the way!

IMG_0124

The train skirts the shore of another small northern Ontario lake.

About half an hour after departure from the Sault, the dining car opened for breakfast, for which they called the various coaches in turn. I had made sure I had something to eat at my room before heading down to the station, so I did not partake of breakfast, but later when the dining car switched over to serving lunch (for which the kitchen remained continuously open until a little after 4 PM) the on-board service staff took orders for boxed lunches from those who wished it, and these orders were taken far enough in advance of the arrival at Canyon so that you would be able to take your lunch and have a nice picnic within the park environs. I ended up ordering one of these lunches, which I believe was about $15 and contained a sandwich (on a nice large Kaiser bun, which could be one of three options: roast beef, tuna or ham & cheese – I chose the ham & cheese), bottle of water, bag of chips, brownie and a hard-boiled egg.

IMG_0056

F40PHR 105 on the north end of the Agawa Canyon Tour Train at Agawa Canyon Park.

After arrival at Canyon, I wandered around the lower part of the park for a while, enjoying the area along the river, eating my lunch and taking a number of photos of the train in the park setting.

IMG_0074

This CN GP9Rm was the southbound unit on the train. There are no turning facilities at Canyon, and the F40PHR has to remain connected to the train as it is also the on-board power source, so the tour train is operated with locomotives at each end.

IMG_0071

Looking south from the train at Canyon.

IMG_0088

The tour train in its context at Agawa Canyon Park. The small car on the house track to the left of the train is the railway’s “camp car”, which car be rented for an overnight stay at the park.

IMG_0109

The rocky cliffs on the other side of the river from the train’s stopping location in the park.

Ultimately, the time in the canyon came to an end, and the whistle was blown giving the 5 minute warning to return to the train for departure. The northbound passenger train to Hearst was also running that day, and I had hoped to photograph it arriving at the south end of Canyon siding, unfortunately it did not end up arriving until after our train had reboarded, and we rolled slowly to the south switch to meet the regular train there, heading south as soon as it had cleared into the siding. So I was only able to see the train from the windows of my coach as it passed by on the adjacent track, and no photos. So that was my disappointment on the trip, from a railfan’s perspective, but the actual ride to and from the Canyon was relaxing and enjoyable, as I alternately read my book or watched the northern Ontario scenery with it’s unending forest dotted with rocky hills and myriad small lakes roll by outside.

Our return time to the Sault was approximately 5:30 PM, and with the sun now in the perfect position for taking photographs at the station, I photographed the train as the unboarding completed and the train pulled out of the station to head back to the yard for servicing, cleaning and overnight parking until the next day’s train. Once the train departed the station, I wandered past the Huron Central yard to photograph some of the pulpwood flatcars around there and then headed off to find some supper, a nice day of train riding completed.

Atlas 2014 Catalog and Announcements – HO AC GP38-2

Earlier this week, Atlas Model Railroad Co. posted their 2014 All-Scales Catalog. Inside the HO Scale Announcements section is an interesting item for Algoma Central fans: Algoma Central is one of the roadnames in the next upcoming release of their TrainMan series GP38-2.

scan0052

AC 201 at Sault Ste. Marie in September 1982. Francis J. Wiener photo, Chris van der Heide collection.

Several years ago, Canadian Hobbycraft had sponsored a custom run of GP38-2s in various Canadian paint schemes including less common shortlines like RaiLink and Algoma Central. These were produced using the Life-Like Proto2000 GP38-2. Of course this limited run has long been out of production, and while one or two might pop up on the secondhand market occasionally, new ones just aren’t available anymore.

The new Atlas model is in the TrainMan series, which is Atlas’s more “entry level” line; the model will have the same proven drive train as Atlas’s higher end “Master Series” but the body may have less of the fine detail, and it most likely won’t have the road-specific details like snowplow, nose headlight, cab front bell, single rear headlight, Canadian-style vertical steps etc. However this will still be a good enough stand in for most, and a good starting point for detailing for many others.

They currently list road numbers 200 and 202, although this could potentially still change before production. The prototype locomotives were built in 1981 by General Motors Diesel Division in London, ON as series AC 200-205. Most or all of them are still operating today (just not in ACR colours) as WC 2001-2006.

ACR From Blair 007

WC 2001 (ex-AC 200) at Steelton Yard before repainting into WC colours. Blair Smith photo.

Part of the ad copy in the catalog indicates matching cabooses will be available, and indeed, further down is a section with new paint schemes on the TrainMan series “steel cupola caboose”, including Algoma Central. Of course this model is based on a small north-eastern US prototype that isn’t remotely similar to any ACR cabooses. The catalog outline artwork shows a caboose numbered AC 9607; this number would correspond to one of the three ex-CP vans acquired in 1992-93. Rapido Trains produced a model of this caboose several years ago. Highball Graphics also has some ACR caboose decals that can be used to custom paint something a bit better than the TrainMan caboose into ACR colours.


One other announcement in the catalog which will be of significant interest to most Canadian modelers is not too much of a surprise: a new version of their 50′ NSC boxcar matching the features of cars owned by Canadian Pacific and Ontario Northland. (Previously they have run Canadian National and British Columbia Railway versions.)

img0336

CP (ex-CPI) 85718 newsprint service boxcar. Jurgen Kleylein photo.

The first run of this version contains three paint schemes: Ontario Northland (7700-7799 series), Canadian Pacific (CPI 85635-85734 series) and Quebec Central/CP* (QC 75100-75299 series). All of the paint schemes represent original factory paint jobs, and future releases of other CP repainted cars are likely in subsequent runs.

* Note: The outline graphics in the catalog show the QC cars as an apparent ex-CP patch job; I checked with Atlas and this is not how the actual cars will be decorated. They will properly represent the as-built appearance of the QC cars, which were built new with QC reporting marks and CP colours. (Quebec Central was a CP subsidiary absorbed in the 1930s. CP re-used the marks in the late 1970s as a method to have empty paper service boxcars routed back to eastern Canada by other roads.)

Build dates for the prototype cars represented by the model are as follows:

Series Build Date Qty. Note
CPI 85635-85734 * # 9-10/77 100 re# CP /78-/83
ONT 7600-7629 11/77 30
ONT 7700-7799 * 9/80 100
QC 75000-75099 11-12/79 100
QC 75100-75299 * 7-8/80 200
QGRY 75000-75299 $ 11-12/79, 7-8/80 81 ex-QC /98

* – Series represented by Atlas
# – Previous series CPI 85500-85634 (Built 3-5/75, 135 cars) are similar but have 10′ wide doors (vs. 9′ doors on all of the other above) and non-cushioned underframes
$ – QGRY series is non-inclusive.

Some woodpulp/paper traffic from mills on the CPR line on the north shore of Lake Superior routed over the ACR from the interchange at Franz (that’s a subject I may attempt to cover in more detail sometime in a dedicated post), and there’s evidence that some paper from the Ontario Northland (from mills at Iroquois Falls, and likely from Kapuskasing and Smooth Rock Falls following the takeover of the ex-CN Kapuskasing subdivision) so any of these cars would not be out of place on a period ACR layout. I’ll be getting a couple of these cars for sure to mix into my CP woodpulp/paper fleet.

Fast Tracks Freight Crates

A couple of weeks ago I had an email in my inbox advertising the latest product available from FastTracks: a model rolling stock storage/transportation box called the “Freight Crate”. The Freight Crate is manufactured out of laser cut hardboard, and is shipped as an unassembled flat kit, to be put together by the modeller. They’re available in a few different sizes for different sized equipment (standard 40′, 65′ and 90′ lengths, and extra-deep versions of the same three sizes for taller cars) and the HO scale versions each hold 8 pieces of equipment.

IMG_9748

A pair of assembled and stacked 40′ Freight Crates.

With a lot of modern Ready-to-Run equipment, the existing packaging really holds and protects the cars quite well, although putting cars into one of these freight cars make take up a little less space, but obviously be a little more expensive. I find keeping this equipment in their original boxes protects them quite nicely. However I have a lot of equipment that is (or will be) extensively kitbashed and modified, and lots of kit-built (like the many Intermountain 40′ boxcar kits I have for various projects) and scratchbuilt equipment as well. For these, the original box (if there even is one) is just a plain box with the kit parts and sprues inside, and when the car is built, the box doesn’t really come with its own padding to protect the car and prevent it from bouncing around.

If you’re like me, and you’re still building and collecting equipment for that “someday” layout, most of the cars I’m acquiring, building or detailing will remain in storage for some time. And since I currently live in a rented apartment with only space for a small switching layout, my rolling stock collection probably has a few more changes of address in its future before they truly find their home on a “permanent” layout.

With that in mind, I ordered a few of these new Freight Crates: two for 40′ cars (perfect for Intermountain and Accurail boxcar kits), and three for cars up to 65′ in length (as I have several 50′ boxcar kits, coil steel cars kits, some scratchbuilt/kitbashed gondola and flatcar projects, and some Walthers 65′ gondolas that may not fit exactly back into their original packaging once shortened and kitbashed with bulkhead ends, etc.).

The box assembles pretty easily in about 20 minutes with regular carpenter’s glue, and Fast Tracks has an assembly instruction video on their site/YouTube channel which illustrates the entire process quite clearly, so I won’t spend too many words talking about that, as it goes together just as shown in their video, other than to remark that the build is quite straightforward. The parts are all laser cut with alignment tabs so everything fits right together exactly and precisely.

Once assembled, the box is nice and sturdy, and the crates are designed to be easily stackable with each other, with tabs on the top of the lid locking in place into holes in the base which also serve as the access points for the sliding key locks that hold the lid securely in place on the box. This is a pretty nice feature that holds everything together nice and safely.

IMG_9751

My finished Freight Crate, loaded up with 40′ boxcars.

The compartment slots in the box are perfectly sized to hold the model equipment. With the standard 40′ version of the box, a 40′ boxcar wrapped in the provided sheet of bubble wrap slid down snugly into the slot, with just a little bit of room on either side of the couplers on each end and an assembled 50′ boxcar fit nice and securely in the 65′ box.

The Freight Crates are not necessarily inexpensive; the basic Standard 40′ box is $25 and there are alternative products on the market of a similar purpose made of cardboard and foam which are likely much cheaper, but the hardboard construction is well engineered and pretty solid and should be quite durable and do a good job of protecting equipment over the long run. The alignment tabs on the lids for stacking also makes for a nice sturdy pile when you have multiples of these crates, as they won’t slide off of each other, and the smaller boxes can stack on top of the larger ones as these tabs are all the same size and centered on the box. It’ll definitely protect that $40 craftsman kit you spent 20 hours on building and detailing and painting better than a few layers of tissue paper in the original plain box in a stack of other such cardboard boxes on a storage shelf.

You may be finding more of my collection of kit built, scratchbuilt and kitbashed custom cars residing in boxes like these.

True Line Trains CC&F Snowplow Announcement – Including AC

tltplowannounce

This past Friday, True Line Trains made an announcement for their next rolling stock model: a HO scale Canadian Car & Foundry snow plow, based on a common design that was owned by Canadian National, Pacific Great Eastern (later British Columbia Railway), Ontario Northland and Algoma Central. (Apparently they will be doing CP versions with different details next.) A fall 2014 release is currently projected.

Some of the features of the model include DCC controlled operating lights and wing blades, and even sound (air horn, and I’m guessing air noises for the pneumatically operated moveable equipment on the plow). While fascinating to have all of these operating features, I wonder how many people actually model a winter layout and would actually make much use of these, and as I’m modeling a summer period it seems a little excessive for something that will sit on a side track in Hawk Junction yard and essentially be little more than a scenic item (non-DCC/sound versions are not listed as going to be available). But I guess this is still better than trying to track down some long out of production brass model of a CN plow to custom paint. And even with the fancy electronically controlled operating features that probably won’t get used much other to test them out and say “Hey, that’s pretty neat!” this is still probably cheaper than the alternative.

The product list includes Algoma Central: plow AC 10105 and two paint versions are listed: a black scheme, and a red scheme. The black scheme would be the “true” AC colours; the ACR’s two plows, AC 10104* and 10105, were painted black into the 1990s when the ACR was acquired by Wisconsin Central in 1995. Sometime shortly after the WC purchase, the two plows were both repainted into the WC’s maroon and gold colours; this would be the “red” scheme mentioned and pictured (at bottom left) on the TLT ad copy.

(* Note the body details of AC 10104 are slightly different than the 10105, so the 10105 is the only one that this model is truly accurate for.)

Here’s a prototype photo of AC 10105 in the Algoma Central’s black paint for reference:

ac10105-1

Note that the prow above the curved plow blade has at some point been modified with a sheet metal extension. This type of modification is extremely common on these plows to help deflect rocks and debris back downwards.

Here’s a later shot of the 10105 repainted into WC maroon and gold:

ac10105-2

(Both photos above courtesy of Blair Smith.)

And finally here’s the AC 10105 at Steelton Yard in summer 2013, still in service and waiting for the heavy snows of winter. (My photo.)

IMG_5973