Freight Car Friday #41 – CN 618212

IMG_7570

This flatcar with a load of steel plate from Essar Steel Algoma and the unusual end braces has an interesting history on CN.

Originally built in the early 1970s as a rather standard 60′ flatcar, it was rebuilt in 1991 for assigned service hauling large aluminum ingots. The wood decking was removed and deck risers and the end braces were added. These cars remained in this service until 2011 when they were replaced by new cars built by National Steel Car and leased from Helm-Pacific. Once they were bumped from this service, CN removed the deck risers, replaced the mesh grating with solid steel decking and allowed these cars to return to general service, although they still retain those distinctive end braces from their time as aluminum ingot cars.

There were a bunch of these cars kicking around on the former ACR when a friend and I rode the Tour of the Line in the fall of 2013. Apart from a couple of loaded cars in a northbound freight that we passed at Hawk Junction, one passing siding had about a dozen empties stored in it and the night before we watched the southbound freight into Michigan head over the International Bridge with quite a few flatcars.

Photographed at Hawk Junction on September 30, 2013 from the vestibule of the northbound passenger train.

One thought on “Freight Car Friday #41 – CN 618212

  1. Chris, this is a cool piece of rolling stock, but I’m also interested in the details of that steel load. Check out the thickness of those steel plates. Are they all the same, or is this someone’s order consisting of plates with varying thickness? The wood blocking underneath the plates seems small to me. If I were to build a model of that, I would probably assume the blocks would have to be bars of steel. I’m surprised the wood wouldn’t get crushed from the vibrations of being in transit, thereby causing the load to be less secure. Obviously, the timbers used are just fine.

    Speaking of securing the load, check out the bent steel bars that hold everything down. These aren’t straps, but rather two separate pieces, probably hooked into the pockets, then bolted together on top of the load by a threaded rod functioning as a turnbuckle.

    I’d like to follow the details of this photo to build a flatcar load like this. The details are what would make this load believable: thickness of each plate, number of plates, size of wood blocking, correct apparatus for securing the load. Do you think this would be a reasonable representation of a flatcar load from the
    1970s?

    -HH

Leave a Reply

Your email address will not be published. Required fields are marked *


one × 7 =