ACR Home Built 40′ Gondolas – Drawings and Scratchbuild

In the late 1940s, the Algoma Central Railway’s car shops rebuilt 250 old 40′ flatcars into gondolas by fabricating new bodies on existing underframes. This fleet comprised two unique series: AC 4601-4803, 203 cars with 39’5″ inside length rebuilt from late 1946 to late 1947; and AC 4804-4850, 47 cars with 40’10” inside length rebuilt in mid-1948. In addition to the extra one foot of length, the latter cars can be visually identified from the former by a different spacing of the side ribs. These cars lasted in revenue service into the 1970s by which time most of them were retired, but several cars remained in work service for a longer time.

ac10591

AC 10591, ex-4601-4803 series gondola in work service as a bucket car for the railway’s diesel host in the early 1990s. Photo courtesy Blair Smith.

As “new”, the cars were painted in a simple black scheme with what is probably the first usage of the black bear logo on freight cars. The logo was ringed in red, and a partial example of a 4601-4803 series car in original paint can be seen on the left edge of this 1956 photo. (Another 350 brand-new 48’6″ gondolas were also acquired in September 1947 from National Steel Car in the AC 3501-3850 series, and also painted this way when new.) Meanwhile, this 1979 photo of AC 4849 shows the paint scheme they wore in the 1960s-1970s.

Obviously such a strikingly unique car with those open fish-belly side sill reinforcements is just begging to be modeled, and this home-built car is just the thing to help capture the character of the railway. To that end, I’ve used known overall dimensions from ORER listings (thanks to Railwire user “Kisatchie” for looking up some numbers for me as my oldest copy is from 1975 which no longer includes either of these series) and photographs to try to work out some sketches and a “reasonably close” scale drawing.

ac0026

Side elevation drawings comparing AC 4601-4803 and 4804-4850 series gondolas.

Over the last couple of weeks I’ve been slowly working on a pair of these cars – one each of each type. Both will become support cars for my diesel crane: bucket car 10591 (ex-4601-4803) and boom car 10588 (ex-4804-4850).

IMG_5533

In progress model of 4601-4803 series car.

The sides are .020″ styrene, with side posts consisting of a .040x.040″ strip on a .010x.060″ bottom flange – although it appears the ribs on the prototype car are actually a Z-angle. The drop side sill is .040x.060″ strip and the top chord is .010x.080″ strip.

Stay tuned for more progress on what should be a very unique pair of cars.

3 thoughts on “ACR Home Built 40′ Gondolas – Drawings and Scratchbuild

  1. Hi Chris
    Glad to see someone putting these old photos to use, it’s exactly why I took them, it seems like eons ago. Take care!

  2. I hope you are still around and active. Living in Europe I find it hard to get the right dimensions to scratchbuild something. Currently I’m trying to make a G47 Gondola. (see drawing and article in MRC July 2022) I try to “make” the ends in Free cad. Having the article I do have a scale drawing. But do you or anybody have a clue of the height of the ribs of the gon ends? I think the bigger ones are higher comparing to the smaller ones (3 big ribs and 2 in between on either side). I made the bigger ones 2 mm and the smaller ones 1,5 mm HO scale.
    Thanks, Marina

    • I don’t really have any specific information on G47 gondolas. The article you have in hand will provide far more information than I would be able to pull up. If the drawing doesn’t provide a particular view/measurement you’ll have to attempt to scale it from the photo(s).

Leave a Reply to Blair Smith Cancel reply

Your email address will not be published. Required fields are marked *


3 × = twelve